Jupiter Horizontal Lathes
This ain’t your father’s lathe. Masterpieces of design each and every one, to turn a part on a JHL is to witness a symphony of automation unfold before your very eyes.
Our Japanese-style lathe design mates ultra-rigid castings with industry-leading spindles, sub-spindles, turrets, and tailstocks to create outstanding parts time and time again with only minimal effort.
Turn and mill the corner on a new era with a Jupiter horizontal lathe!
SPEC | UNIT | JHL-400 | JHL-710 | JHL-800 | JHL-1200 | JHL-1700 |
---|---|---|---|---|---|---|
Turret Type | Hyd. V10 / V12 | Hyd. V10 / V12 | Hyd. V8 / V12 | Hyd. V8 / V12 | Hyd. V8 / V12 | |
Distance B/w Centers | in | 15.75 | 27.95 | 31.50 | 47.24 | 66.93 |
Swing Over Bed | in | 22.05 | 23.62 | 26.77 | 26.77 | 26.77 |
Swing Over Saddle | in | 14.37 | 17.72 | 19.69 | 19.69 | 19.69 |
Max Turning Diameter | in | 15.75 | 17.72 | 19.69 | 19.69 | 19.69 |
Max Working Length | in | 11.81 | 24.02 | 29.53 | 45.28 | 64.96 |
Chuck Size | in | 6 | 10 | 10 | 10 | 10 |
Optional Chuck Size | in | – | – | 12 | 12 | 12 |
Spindle Bore | in | 2.17 | 3.62 | 3.62 | 3.62 | 3.62 |
Bar Capacity | in | 1.77 | 2.95 | 3.07 | 3.07 | 3.07 |
Spindle Speed | rpm | 6,000 | 3,000 | 3,000 | 3,000 | 3,000 |
Spindle Nose | A2-5 | A2-8 | A2-8 | A2-8 | A2-8 | |
Spindle Motor (cont. / 30 min) |
hp | 15 / 20 | 20 / 25 | 20 / 25 | 20 / 25 | 20 / 25 |
Guideway Type | Linear Roller | Box | Box | Box | Box | |
Rapid Traverse – X | ipm | 1,181 | 787 | 787 | 630 | 630 |
Rapid Traverse – Z | ipm | 1,181 | 787 | 984 | 787 | 787 |
Cutting Feed Rate | ipm | 394 | 394 | 394 | 394 | 394 |
Overall Dimensions (L x W x H) |
in | 95 x 62 x 67 | 134 x 75 x 77 | 136 x 73 x 79 | 152 x 73 x 79 | 167 x 73 x 79 |
Weight | lb | 7,370 | 11,000 | 12,980 | 14,410 | 15,840 |
- 3-color Warning Lamp
- Auto Power Off (M30)
- Automatic Lubrication System
- Bar Feeder Interface
- BMT-65 Power Turret (JHL-710, JHL-1200CMY)
- Chip Conveyor
- Coolant System
- Dynamic Graph Simulation
- Ethernet
- FANUC 0i-TF Control
- Foot Switch Control for Chuck
- Front Air Blast
- Heat Exchanger
- Hollow Hydraulic 3-Jaw Chuck (6, 8, 10, 12, 15″)
- VDI Turret (JHL-226)
- Manual Guide 0i
- Programmable Tailstock
- Memory Card Interface(PCMCIA)
- Rigid Tapping
- RS-232 Interface
- Tool Box with Tools
- Working Lamp
- Air Conditioner
- Auto Door
- Bar Feeder
- Collet Chuck
- High Pressure Cutting Coolant Motor
- Manual/Auto Tool Presetter
- Oil Mist Collector
- Oil Skimmer
- Parts Catcher
- Product Conveyor
- Transformer/ Voltage Stabilizer
Not all configurations are available in all regions. Specifications are subject to change without notice. Please contact your Jupiter Machine Tool representative for current configurations.
Jupiter Lathes – Simply Unrivaled
Which JHL would you like to know more about?