Jupiter Heavy Duty Vertical Lathes
Jupiter’s vertical turning lathes are designed from the casting on up with maximum reliability and performance in mind.
When you need to turn massive workpieces to extreme tolerances look no further than a heavy duty VTL from Jupiter.
All of our heavy duty VTL’s come in both standard and live-tooling configurations.
Looking for high-speed, high-volume runs of smaller parts? View our line of High Speed VTLs.
Max Swing Diameter Below 100 Inches | Max Swing Diameter Beyond 100 Inches |
---|---|
Heavy Duty VTLs | Heavy Duty VTLs |
Heavy Duty VTLs With Live Tooling | Heavy Duty VTLs With Live Tooling |
Standard Heavy Duty VTLs – Max Swing Diameter Below 100 Inches
SPEC | UNIT | VTL-33 | VTL-37 | VTL-47 | VTL-63 | VTL-79 | VTL-98 |
---|---|---|---|---|---|---|---|
Control Type | — | Fanuc 0i-T | Fanuc 0i-T | Fanuc 0i-T | Fanuc 0i-T | Fanuc 0i-T | Fanuc 0i-T |
Max Swing Diameter | in | 33.46 | 37.40 | 47.24 | 62.99 | 78.74 | 98.43 |
Max Turning Diameter | in | 33.46 | 37.40 | 47.24 | 62.99 | 78.74 | 98.43 |
Distance From Ram To Table | in | 36.42 | 36.42 | 36.42 | 25.6 ~ 57.1 | 25.6 ~ 57.1 | 32.5 ~ 71.9 |
Max Turning Height | in | 25.59 | 25.59 | 25.59 | 47.24 | 47.24 | 62.99 |
Max Workpiece Weight | lb | 3,300 | 4,400 | 7,700 | 11,000 | 17,600 | 26,400 |
Table Diameter | in | 24.02 | 31.50 | 39.37 | 49.21 | 62.99 | 78.74 |
Speed Range | rpm | 1 ~ 700 | 1 ~ 600 | 1 ~ 400 | 3 ~ 300 | 3 ~ 250 | 5 ~ 200 |
Change Gear Speed | — | 2 Step | 2 Step | 2 Step | 2 Step | 2 Step | 2 Step |
Spindle Nose | — | A2-11 | A2-11 | — | — | — | — |
Tool Capacity | — | 12 | 12 | 12 | 12 | 12 | 12 |
Tool Sizes | mm | □25, □32 | □25, □32 | □25, □32 | □25, □32 | □25, □32, □40 | □25, □32, □40 |
Ram Cross-Section | in | 7.87 x 7.87 | 7.87 x 7.87 | 7.87 x 7.87 | 8.66 x 8.66 | 8.66 x 8.66 | 8.66 x 8.66 |
Rapid Traverse – X | ipm | 394 | 394 | 394 | 394 | 394 | 394 |
Rapid Traverse – Z |
ipm | 394 | 394 | 394 | 394 | 394 | 394 |
Horizontal Travel – X | in | -3.9 ~ 25.6 | -3.9 ~ 29.5 | -3.9 ~ 29.5 | -7.9 ~ 37.4 | -7.9 ~ 45.3 | -11.8 ~ 57.1 |
Vertical Travel – Z | in | 23.62 | 23.62 | 27.56 | 35.43 | 35.43 | 47.24 |
Cutting Feed Rate | ipm | 197 | 197 | 197 | 197 | 197 | 197 |
Feed Override Range | % | 0 ~ 150 | 0 ~ 150 | 0 ~ 150 | 0 ~ 150 | 0 ~ 150 | 0 ~ 150 |
Cross-rail Travel | in | Fixed | Fixed | Fixed | 31.50 | 31.50 | 39.37 |
Spindle Motor (cont./30 min) | hp | 25 / 29.5 | 25 / 29.5 | 40 / 50 | 50 / 60 | 50 / 60 | 80.5 / 100.5 |
Feed Motors (X / Z) | hp | 5.4 / 5.4 | 5.4 / 5.4 | 5.4 / 5.4 | 9.4 / 9.4 | 9.4 / 9.4 | 7.4 / 7.4 |
Power Requirement | kVA | 40 | 40 | 75 | 75 | 75 | 90 |
Dimensions (L x W x H) | in | 185 x 189 x 177 | 185 x 189 x 177 | 205 x 191 x 157 | 256 x 193 x 205 | 280 x 205 x 207 | 299 x 217 x 262 |
Standard Heavy Duty VTLs – Max Swing Diameter Beyond 100 Inches
SPEC | UNIT | VTL-118 | VTL-142 | VTL-177 | VTL-236 | VTL-256 |
---|---|---|---|---|---|---|
Control Type | — | Fanuc 0i-T | Fanuc 0i-T | Fanuc 0i-T | Fanuc 0i-T | Fanuc 0i-T |
Max Swing Diameter | in | 118.11 | 141.73 | 177.17 | 236.22 | 275.59 |
Max Turning Diameter | in | 116.93 | 141.73 | 177.17 | 236.22 | 275.59 |
Distance From Ram To Table | in | 32.5 ~ 71.9 | 34.6 ~ 93.7 | 34.6 ~ 93.7 | 47.2 ~ 118.1 | 47.2 ~ 118.1 |
Max Turning Height | in | 62.99 | 78.74 | 78.74 | 102.36 | 102.36 |
Max Workpiece Weight | lb | 33,000 | 66,000 | 88,000 | 176,000 | 220,000 |
Table Diameter | in | 98.43 | 118.11 | 157.48 | 196.85 | 236.22 |
Speed Range | rpm | 5 ~ 160 | 3 ~ 120 | 1 ~ 85 | 1 ~ 50 | 1 ~ 20 |
Change Gear Speed | — | 2 Step | 2 Step | 2 Step | 2 Step | 2 Step |
Tool Capacity | — | 12 | 16 | 16 | 16 | 16 |
Tool Sizes | mm | □25, □32, □40 | □32, □40 | □32, □40 | □32, □40 | □32, □40 |
Ram Cross-Section | in | 8.66 X 8.66 | 11.81 x 11.81 | 11.81 x 11.81 | 15.75 x 15.75 | 15.75 x 15.75 |
Rapid Traverse – X | ipm | 394 | 394 | 394 | 394 | 394 |
Rapid Traverse – Z |
ipm | 394 | 394 | 394 | 394 | 394 |
Horizontal Travel – X | in | -11.8 ~ 65.0 | -11.8 ~ 78.7 | -11.8 ~ 96.5 | -3.9 ~ 118.1 | -3.9 ~ 157.5 |
Vertical Travel – Z | in | 47.24 | 59.06 | 59.06 | 86.61 | 86.61 |
Cutting Feed Rate | ipm | 197 | 79 | 79 | 79 | 79 |
Feed Override Range | % | 0 ~ 150 | 0 ~ 150 | 0 ~ 150 | 0 ~ 150 | 0 ~ 150 |
Cross-rail Travel | in | 39.37 | 59.06 | 59.06 | 70.87 | 70.87 |
Spindle Motor (cont./30 min) | hp | 80.5 / 100.5 | 80.5 / 100.5 | 80.5 / 100.5 | 80.5 / 100.5 | 80.5 / 100.5 |
Feed Motors (X / Z) | hp | 7.4 / 7.4 | 7.4 / 7.4 | 7.4 / 7.4 | 7.4 / 7.4 | 7.4 / 7.4 |
Power Requirement | kVA | 90 | — | — | — | — |
Dimensions (L x W x H) | in | 307 x 240 x 262 | 335 x 256 x 291 | 402 x 276 x 291 | 492 x 354 x 354 | 512 x 433 x 354 |
Heavy Duty VTLs With Live Tooling – Max Swing Diameter Below 100 Inches
SPEC | UNIT | VTL-33M | VTL-37M | VTL-47M | VTL-63M | VTL-79M | VTL-98M |
---|---|---|---|---|---|---|---|
Control Type | — | Fanuc 0i-T | Fanuc 0i-T | Fanuc 0i-T | Fanuc 0i-T | Fanuc 0i-T | Fanuc 0i-T |
Max Swing Diameter | in | 33.46 | 37.40 | 47.24 | 62.99 | 78.74 | 98.43 |
Max Turning Diameter | in | 33.46 | 37.40 | 47.24 | 62.99 | 78.74 | 98.43 |
Distance From Ram To Table | in | 36.42 | 36.42 | 36.42 | 25.6 ~ 57.1 | 25.6 ~ 57.1 | 33.9 ~ 73.2 |
Max Turning Height | in | 25.59 | 25.59 | 25.59 | 46.06 | 46.06 | 62.99 |
Max Workpiece Weight | lb | 3,300 | 4,400 | 7,700 | 11,000 | 17,600 | 26,400 |
Table Diameter | in | 24.02 | 31.50 | 39.37 | 49.21 | 62.99 | 78.74 |
Speed Range | rpm | 1 ~ 700 | 1 ~ 600 | 1 ~ 400 | 3 ~ 300 | 3 ~ 250 | 5 ~ 200 |
Change Gear Speed | — | 2 Step | 2 Step | 2 Step | 2 Step | 2 Step | 2 Step |
Spindle Nose | — | A2-11 | A2-11 | — | — | — | — |
Live Tooling Spindle Speed | rpm | 50 ~ 2,250 | 50 ~ 2,250 | 50 ~ 2,250 | 50 ~ 2,250 | 50 ~ 2,250 | 50 ~ 2,250 |
Tool Capacity | — | 12 | 12 | 12 | 16 | 16 | 16 |
Tool Sizes | mm | □25, □32 | □25, □32 | □25, □32 | □25, □32 | □25, □32, □40 | □25, □32, □40 |
Ram Cross-Section | in | 8.66 x 8.66 | 8.66 x 8.66 | 8.66 x 8.66 | 8.66 x 8.66 | 8.66 x 8.66 | 8.66 x 8.66 |
Rapid Traverse – X | ipm | 394 | 394 | 394 | 394 | 394 | 394 |
Rapid Traverse – Z |
ipm | 394 | 394 | 394 | 394 | 394 | 394 |
Horizontal Travel – X | in | -3.9 ~ 25.6 | -3.9 ~ 29.5 | -3.9 ~ 29.5 | -7.9 ~ 37.4 | -7.9 ~ 45.3 | -11.8 ~ 57.1 |
Vertical Travel – Z | in | 23.62 | 23.62 | 27.56 | 35.43 | 35.43 | 47.24 |
Cutting Feed Rate | ipm | 197 | 197 | 197 | 197 | 197 | 197 |
Feed Override Range | % | 0 ~ 150 | 0 ~ 150 | 0 ~ 150 | 0 ~ 150 | 0 ~ 150 | 0 ~ 150 |
Cross-rail Travel | in | Fixed | Fixed | Fixed | 31.50 | 31.50 | 39.37 |
Spindle Motor (cont./30 min) | hp | 40 / 50 | 40 / 50 | 40 / 50 | 50 / 60 | 50 / 60 | 80.5 / 100.5 |
Feed Motors (X / Z) | hp | 5.4 / 5.4 | 5.4 / 5.4 | 5.4 / 5.4 | 9.4 / 9.4 | 9.4 / 9.4 | 7.4 / 7.4 |
Power Requirement | kVA | 55 | 55 | 90 | 90 | 90 | 105 |
Dimensions (L x W x H) | in | 185 x 189 x 177 | 185 x 189 x 177 | 205 x 191 x 179 | 272 x 193 x 222 | 291 x 205 x 222 | 299 x 217 x 276 |
Heavy Duty VTLs With Live Tooling – Max Swing Diameter Beyond 100 Inches
SPEC | UNIT | VTL-118M | VTL-142M | VTL-177M | VTL-236M | VTL-256M |
---|---|---|---|---|---|---|
Control Type | — | Fanuc 0i-T | Fanuc 0i-T | Fanuc 0i-T | Fanuc 0i-T | Fanuc 0i-T |
Max Swing Diameter | in | 118.11 | 141.73 | 177.17 | 236.22 | 275.59 |
Max Turning Diameter | in | 116.93 | 141.73 | 177.17 | 236.22 | 275.59 |
Distance From Ram To Table | in | 33.9 ~ 73.2 | 34.6 ~ 93.7 | 34.6 ~ 93.7 | 47.2 ~ 118.1 | 47.2 ~ 118.1 |
Max Turning Height | in | 62.99 | 78.74 | 78.74 | 102.36 | 102.36 |
Max Workpiece Weight | lb | 33,000 | 66,000 | 88,000 | 176,000 | 220,000 |
Table Diameter | in | 98.43 | 118.11 | 157.48 | 196.85 | 236.22 |
Speed Range | rpm | 5 ~ 160 | 3 ~ 120 | 1 ~ 85 | 1 ~ 50 | 1 ~ 20 |
Change Gear Speed | — | 2 Step | 2 Step | 2 Step | 2 Step | 2 Step |
Live Tooling Spindle Speed | rpm | 50 ~ 2,250 | 50 ~ 2,250 | 50 ~ 2,250 | 50 ~ 2,250 | 50 ~ 2,250 |
Tool Capacity | — | 16 | 20 | 20 | 24 | 24 |
Tool Sizes | mm | □25, □32, □40 | □32, □40 | □32, □40 | □32, □40 | □32, □40 |
Ram Cross-Section | in | 8.66 X 8.66 | 11.81 x 11.81 | 11.81 x 11.81 | 15.75 x 15.75 | 15.75 x 15.75 |
Rapid Traverse – X | ipm | 394 | 394 | 394 | 394 | 394 |
Rapid Traverse – Z | ipm | 394 | 394 | 394 | 394 | 394 |
Horizontal Travel – X | in | -11.8 ~ 65.0 | -11.8 ~ 78.7 | -11.8 ~ 96.5 | -3.9 ~ 118.1 | -3.9 ~ 157.5 |
Vertical Travel – Z | in | 47.24 | 59.06 | 59.06 | 86.61 | 86.61 |
Cutting Feed Rate | ipm | 197 | 79 | 79 | 79 | 79 |
Feed Override Range | % | 0 ~ 150 | 0 ~ 150 | 0 ~ 150 | 0 ~ 150 | 0 ~ 150 |
Cross-rail Travel | in | 39.37 | 59.06 | 59.06 | 70.87 | 70.87 |
Spindle Motor (cont./30 min) | hp | 80.5 / 100.5 | 80.5 / 100.5 x 2 | 80.5 / 100.5 x 2 | 80.5 / 100.5 x 2 | 80.5 / 100.5 x 2 |
Feed Motors (X / Z) | hp | 7.4 / 7.4 | 7.4 / 7.4 | 7.4 / 7.4 | 7.4 / 7.4 | 7.4 / 7.4 |
Power Requirement | kVA | 105 | — | — | — | — |
Dimensions (L x W x H) | in | 307 x 240 x 276 | 335 x 256 x 315 | 402 x 276 x 315 | 492 x 354 x 394 | 512 x 433 x 394 |
Not all configurations are available in all regions. Specifications are subject to change without notice. Please contact your Jupiter Machine Tool representative for current configurations.
- 3-color Warning Lamp
- 4-Jaw Chuck
- Automatic Lubrication System
- Chip Conveyor and Cart
- Coolant System with Tank and Bed Wash-down System
- Full Sheet Metal Enclosure (Open Top)
- Heat Exchanger for Electrical Cabinet
- Hydraulic Power Unit
- Leveling Bolts and Pads
- Tool Box and Adjustment Tools
- Work Light
- A/C for Electrical Cabinet
- Auto-door
- Chuck Position Sensor
- Dual-speed Gearbox
- Extended Column
- Extended Vertical Travel (Z Axis)
- Grinding Functionality
- Hard Jaws
- High and Low Pressure Chucking
- High Pressure Coolant Through Tool Holder
- Hydraulic Chuck and Cylinder
- Linear Encoder on X/Z Axes
- Lubricant Chiller for Spindle Bearings and Gears
- Oil Mist Collector
- Oil Skimmer
- Soft Jaws
- Spindle Motor Upgrade
- Tool Holder
- Tool Presetter
- Transformer
Jupiter VTLs – Simply Unrivaled
Which Jupiter Heavy Duty VTL would you like to know more about?